Li-Ion Battery Anode -Double Layer CMS Graphite Coated on Copper Foil (241mm L x 200mm W x 90um Thick) 5 sheets/bag bc-cf-241-ds Thermal Evaporation

Li-Ion Battery Anode -Double Layer CMS Graphite Coated on Copper Foil (241mm L x 200mm W x 90um Thick) 5 sheets/bag bc-cf-241-ds Thermal EvaporationThis electrode sheet is based on copper foil coated by carbon in the double sides, and is used as the anode electrode of Li Ion battery 5 sheets bag Specifications Current collector (substrate): Copper foil, 9 micron Anode material: Composite Graphite Binder: SBR+CMC (2. 5% SBR, 1. 8% CMC), conductive carbon" Super P, 2. 5% Double sides active material density: 120g Active Material Proportion in Powder: 93. 2% Length: 241mm, Width: 200mm (coating

Resistivity:                       >50 Ohms/cm (If you would like to measure the resistivity accurately

Orientation Flat <100>

Also turn the hydraulic valve to Lock position when not in use

998 alumina tube can be used at operating temperatures to 1750oC in both oxidizing and reducing atmospheres

Packing:    in 1000 class cleanroom with vacuumed bag

~6E-2 Torr after 4 hr pumping

the PTFE flange may melt off if the furnace temperature is higher than 500ºC

Pressing sample by a pressing machine under suitable pressure

Orientation:  <110> +/- 2o

This wafer container is designed for 4" diameter wafers

Z-axis: ±  0

Similar to the Horizontal-dipping Process