180 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (28.0 mm OD, 76.2 mm CLR) Flat Profile Maximum Ovality: <10%

Maximum Ovality: <10%

This roll set will bend the flat stock up to 1-1/4" in width

Other Specifications

standard 6 cubic inches of oil/minute on competing models)

Includes: 2" Dimple Dies | Requires 2" Pilot Hole

180 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (28.0 mm OD, 76.2 mm CLR) Flat Profile Maximum Ovality: <10%Specs Outside Diameter of the Tubing (OD): 28. 0 mm Minimum Wall Thickness (DOM): 0. 095" (2. 4 mm) Minimum Wall Thickness (4130): 0. 095" (2. 4 mm) Minimum Wall Thickness (ERW): 0. 109" (2. 8 mm) Minimum Wall Thickness (Stainless): Contact for Details Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 134 (3. 4 mm) Centerline Radius: 3" (76. 2 mm) Maximum Degree of