BMM/BM CC 15 mL, 1cm2 - Bottom Mount Corrosion Cell Select electrolyte type::organic electrolyte

BMM/BM CC 15 mL, 1cm2 - Bottom Mount Corrosion Cell Select electrolyte type::organic electrolyteThis is a stationary solution corrosion cell for EIS and conventional electrochemical measurements on: (a) thin metal film deposited on flat substrate, (b) metal plate, (c) metal mesh, (d) metal wire and (e) metal ribbon. The sample is installed from the bottom via magnetic or screw mount in between two chambers filled with electrolyte. In cases (a) and (b) bottom chamber is unused and stays dry. The counter or and reference electrodes are mounted in

Polished:         one side polished

What is more

Its detachable design allows you to test the pouch cell behavior as well as structural changes of electrodes easily

Ra: < 5A (RMS)

making the electrode assembly more resistant to degradation over time

Application for connection to Compact Direct Read Flow Meter

The use of a High-Pressure Electrochemical Cell involves working with equipment capable of withstanding elevated pressures and conducting experiments with potentially reactive chemicals

Discharge at 12mA - 3000 mA per channel with 45W per channel limit (90W with both channels combined)

( Please click here to convert humidity unit )

Carrier Concentration                                     <1E15 @77K

1 x rhodium plated counter electrode with PEEK plug (6 mm dia

6V (depending on Vanadium electrolyte composition)