Tools for moulding. Ejector pins with cylindrical head Ingestion-build-48024 and secretariats for working drafts

and secretariats for working drafts during the development of a standard and for submission of these documents to the ISO Central Secretariat for publication

Why should you use BS EN 13306 on Maintenance terminology

BS 4479-2 is the second part of the BS 4479 series that gives recommendations for the design of parts that are to be coated by electroplating or autocatalytic plating

Checking using standard rubber blocks

BS EN 61249-2-39 specifies requirements for properties of modified brominated epoxide woven E-glass laminated sheet of a thickness 0

Tools for moulding. Ejector pins with cylindrical head Ingestion-build-48024 and secretariats for working drafts1 Scope This International Standard specifies the dimensions and tolerances, in millimetres, of ejector pins with cylindrical head which are used in compression and injection moulds and in die casting dies. It also gives material guidelines and hardness requirements, and specifies the designation of ejector pins with cylindrical head. Flat ejector pins are specified in ISO 8693 and shouldered ejector pins are specified in ISO 8694.