Determination of certain substances in electrotechnical products - Mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS PAS 15 This standard has been aligned

This standard has been aligned

irradiation facilities and dosimetry

Why should you use BS EN IEC 60332-3-22 - Vertical flame test for vertically-mounted bunched wires or cables

in a standby mode or in an active mode

to prevent scalding

Determination of certain substances in electrotechnical products - Mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS PAS 15 This standard has been aligned1 Scope This part of IEC 62321 describes test methods for mercury in polymers, metals and electronics by CV AAS, CV AFS, ICP OES and ICP MS. This standard specifies the determination of the levels of mercury (Hg) contained in electrotechnical products. These materials are polymers, metals and electronics (e. g. printed wiring boards, fluorescent lamps, mercury switches). Batteries containing Hg should be handled as described in [1]1. The