LiTaO3 optical grade, Z-cut wafer, 2" Dia x 0.5mm , 2sp - LTOZ50D05C2 InP

LiTaO3 optical grade, Z-cut wafer, 2" Dia x 0.5mm , 2sp - LTOZ50D05C2 InPOptical grade single crystal LiTaO3 Orientation: Z cut Size: 2" diameter x 0. 5mm Polish: two sides polished Typical Properties: Materials Purity: > 99. 995% Crystal Structure: Rhombohedral space group 3M Lattice Constant: ( Hex ) a = 5. 154 c = 13. 783 Melting Point: 1650 oC Density: 7. 45 g cm3 Curie Point: 610 oC Hardness: 5. 5 6 Moh Thermal Expansion: a a= 16. 1 x 10 6 k a c= 4. 1 x 10 6 k Resistivity: 1015 W. m Dielectric Constant: es11 e0: 39

Package:                           Clean and  Packed in 1000 class clean room

2 to order

This electrode sheet is based on Aluminum foil coated by Lithium Nickel Manganese Cobalt Oxide (NCM811) on a single side and can be used as the cathode of Li-Ion battery -- 5 sheets /bag

Sample size 50mm(L) x 25mm(W) x 2

Surface finish (RMS or Ra)  : < 10A (By AFM 5x5 um2Normal0MicrosoftInternetExplorer4 ) Normal0MicrosoftInternetExplorer4 /* Style Definitions */table

which can be heated up to 180°C via an independent temperature controller with +/- 1°C accuracy

4 rectangular ports (75 × 35mm) at the back of chamber as electric feedthrough

The diamond wire produces minimum kerf loss

2 below to see the slot die on the bottom heated coater

Used in optical modulators and for non-linear optics such as second-harmonic generation (SHG)

9% pure stranded copper for maximum conductivity

Input Voltage:   0 - 35 VAC 50/50Hz single phase