Gasket Kit for BBR 170cc Kits - KLX140 dipstick

Gasket Kit for BBR 170cc Kits - KLX140 dipstickReplacement gasket kit for the BBR 170cc Bore Kits (63mm) used on the KLX140's Does NOT fit stock bore.

7 inches or 833mm

Cam sprocket

HD adult springs – compare well to our 300LB rear DNM shock

All you need is a 17mm wrench• Captive adjustment bolt design means when you turn the bolt the axle blocks move forwardsand backwards keeping the block tight to the adjustment bolt so there is no play between boltand the blocks and allows for very precise adjustments• One block stays in place and will not fall out when you remove the axle• Works with OEM axle and Warp 9 Titanium

it cost much less than when last available from Honda

The Disc Brake Arm of these brake pedals has holes for both the V2 (short) master cylinder mount and the V3/MM12P (long) mount

Double pinch bolt

ensuring proper drainage and reduced escape of oil thru the vent tube

Replacement Parts:

the main purpose to use a slipper clutch in place of a normal clutch is to mitigate the effects of Engine Braking when riders decelerate as they enter corners

Quality injection molded plastic from Italy

- New hardware is provided to allow interchanging of throttle bodies