Linear Shaft on Low Profile Rail - Carbon Steel - LSRA08-024.000-SL Diameter: 1/2" Length: 24" Open Linear Plain Bearing The roller bearing is crafted

The roller bearing is crafted from case-hardened S450J2 MOD

Neither drilled nor tapped - pre-drilled shafts are NIPDM (metric) or NIPDL (inch)

coated with PTFE to prevent flaking

20mm OD and 16mm length

Double Plain Linear Bearing of 60mm JIS Metric ID with an end-mounted square flange and a compensated running clearance of 0

Linear Shaft on Low Profile Rail - Carbon Steel - LSRA08-024.000-SL Diameter: 1/2" Length: 24" Open Linear Plain Bearing The roller bearing is crafted1 2 Inch Diameter Carbon steel linear shaft, precision case hardened and ground, fused to a low profile AISI C 1018 Steel Linear Support Rail. This Low Profile Linear Support Rail Assembly (LSRA) is 40% lower than regular assemblies. Length: 24" Not Drilled If standard mounting holes are required on the support rail, specify this via Configure CAD & Quote below using the part number LSR 12 PD which will get you standard industry hole spacing (you can