Pre-Drilled Linear Shaft - Stainless Steel - NIPDM25SS-0300-SL Diameter: 25mm Length: 300mm Open Linear Plain Bearing

Pre-Drilled Linear Shaft - Stainless Steel - NIPDM25SS-0300-SL Diameter: 25mm Length: 300mm Open Linear Plain BearingPre Drilled Linear Shaft of 440 Stainless Steel with a 25mm diameter and 300mm length, made in the USA by PBC Linear with Simplicity RC 50 Plus Hardness. Pre drilled with industry standard hole spacing, but no tapping has been done. Click Configure CAD and Quote for tapping or custom lengths. Optimized for Simplicity self lubricating plain bearings and linear ball bearings. Holes are spaced 200mm apart and start 100mm from the end Length tolerance: +

25" diameter shaft - 36" in length - made from a single piece of feather-weight ceramic-coated aluminum

Low Profile Steel Linear Support Rail for Shafts of 1" Diameter

A compensated running clearance of 0

Closed Linear Ball Bearing with a 50mm ISO Metric ID (inner diameter)

Linear Shaft made of 1060 Carbon Steel with a 4" diameter and 24" length

Adjustable Linear Ball Bearing with a 40mm ISO Metric ID (inner diameter)

Twin-shaft design provides stable linear guidance for the base plate carriage

Pre-Drilled Linear Shaft of 440 Stainless Steel with a 40mm diameter and 600mm length

33") wide Redi-Rail RR14CR linear rails (with stainless steel raceways) with 3 double row

Sleeve bearing of 2

The crown creates a curved contact surface that lets a compatible self-aligning housing seat the bearing at a slight angle

25″ ID (inner diameter) and a precision running clearance of 0